Re: Formaldehyde source (was Gum woes)

From: Scott Wainer ^lt;swphoto@verizon.net>
Date: 05/11/05-05:06:33 PM Z
Message-id: <000901c5567e$14a569a0$55affea9@scottho3aakafr>

Hi Kerik,

Looking at the respirator, the filter (3M 6001/60928) says rated for organic
vapor/acid gas/P100. I checked 3M's website and they do have a filter
(6001/60925) rated for formaldehyde/organic vapor/P100 that will fit my
respirator. I couldn't find any information whether my filter, being rated
for more dangerous substances, was suitable for use with formaldehyde. Do
you know if it will work or should I get filters listed for formaldehyde?

Best, Scott

swphoto@verizon.net

----- Original Message -----
From: "Kerik" <kerik@kerik.com>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Wednesday, May 11, 2005 6:35 PM
Subject: Re: Formaldehyde source (was Gum woes)

>
> > I also wear a respirator rated for organic vapors when working with all
> > chemicals.
>
> Scott,
>
> FYI, if you're going to work with Formaldehyde, you should check to see if
> your VOC respirator is going to give you adequate protection. I had to get
> special cartridges specifically for formaldehyde.
>
> Kerik
>
Received on Wed May 11 17:07:17 2005

This archive was generated by hypermail 2.1.8 : 06/02/05-10:12:02 AM Z CST