Matthew Hoffman (mhoffman2@sprynet.com)
Fri, 23 Jul 1999 17:33:49 -0400
I'm not the handiest soul so I won't blame the instructions in the article
mentioned below. That said, I spent a weekend trying to put together bellows
as described. Except for a glue headache and a massively unusable pile of
folded fabric, I didn' t have much to show for it.
The article as I recall is vague about the material needed. Nail this
down before you start. I didn't.
-- Matthew
.
----- Original Message -----
From: Robert Hudyma <rhudyma@netcom.ca>
To: <alt-photo-process-l@sask.usask.ca>
Sent: Friday, July 23, 1999 10:57 AM
Subject: Re: replacement bellows?
> At 12:10 PM 7/22/99 -0500, you wrote:
> >
> >Does anyone know of a really good set of plans/instructions for making
> >bellows that might be available on the internet. I have made several
> >bellows in the past but always with a glitch or two. Now I am thinking
> >about re-doing the bellows on my 12X20 and really want to get it right!
> >
>
> Try this back issue of View Camera magazine:
>
> Building a Camera Bellows, July/Aug. 1996. pp 52-54.
>
>
> Robert Hudyma, Semi-Tech Corporation, 2800 14th Avenue, Suite 511,
> Markham Ontario, Canada L3R 0E4. Fax: (905) 475-3652
> Email: rhudyma@netcom.ca
>
> The distinction between past, present and future is only an illusion, even
> if a stubborn one. - Albert Einstein
>
>
This archive was generated by hypermail 2.0b3 on Thu Oct 28 1999 - 21:40:37